|
QM series Dedicated Installation Amplifier 1、This amplifier is noise-free When without output connect, the AODA amplifier have no noise even itturns to the maximal volume. It will increase thequality of your work.
2、The amplifier has multiple wise protection systems built-in TheAODA amplifier integrate protect impact function of the power soft-start, DCoutput protect function, longtime over-heatprotect function, and turn on delay function. It can speedy protect the circuit when theamplifier short circuit and over loading, and won't intermit the performance.
3、The unit has built-in digital current limiter(crowbar)protection Whysome audio system always is broken the alt? It maybe isn't the problem of alt,if you choose the wrong amplifier it will alsocause it. The smooth-top distortion of the amplifier not only cause the deterioration of sound,but also the killer of alt. The AODA amplifier use the input/output comparative circuit. Itwill cut down the input signal when the amplifier going to the distortion state, so it can protectthe speaker system. This function have control by on switch, you can switch on/off to use it ornot. It let you have more choice.
4、 AODA Amplifier have tunnel heat release system, with high heatoutput. Every channel have separate winshield fitting, insure theheat can release in time and make the amplifier operating safely.
5、AODA amplifier has various input/output connectors, it have threeway sensitivity switch for choose level, stereo, bridged-mono, andparallel mono. It can connect the speaker speedy by the professional SPEAKON.
6、 You can be clear at a glance of the working status through the LEDindicator in the front panel of AODA amplifier, and let theoperation more easily. |
Characteristic | QM2 | QM3 | QM4 | QM5 | QM6 | QM7 | QM8 | QM9 | QM10 | QM12 |
Out Power(8Ω) | 2×200W | 2×300W | 2×400W | 2×500W | 2×600W | 2×700W | 2×800W | 2×900W | 2×1000W | 2×1200W |
Out Power(4Ω) | 2×300W | 2×500W | 2×700W | 2×850W | 2×1050W | 2×1200W | 2×1350W | 2×1530W | 2×1700W | 2×1900W |
Out Power(2Ω) | 2×500W | 2×800W | 2×1000W | 2×1300W | 2×1400W | 2×1600W | 2×1800W | 2×2000W | 2×2200W | 2×2400W |
Out Power (BRIDGE) (8Ω) | 600W | 1000W | 1250W | 1460W | 1750W | 2050W | 2300W | 2600W | 2900W | 3000W |
Out Power (BRIDGE) (4Ω) | 1000W | 1300W | 1700W | 1920W | 2300W | 2750W | 2900W | 3400W | 3800W | 4000W |
Output Circuit Type | Class AB | Class AB | Class AB | Class AB | Class AB | Class H | Class H | Class H | Class H | Class H |
Input Impedance | 20KΩ | |||||||||
Frequency Response | 5Hz~50KHz | |||||||||
THD 20HZ~KHz(8Ω) | 0.05% | |||||||||
Slew Rate | 40V/usec | |||||||||
Hum and Noise | 103dB | |||||||||
Damp Modulus(8Ω） | ＞400 | ＞500 | ＞500 | ＞500 | ||||||
Radiator | High/Low Automatism Corlrol | |||||||||
Suteguard | DC Safeguard/out Overloading/Chancroid Sgartup/Boot-Strap Short Test | |||||||||
N Weight/G Weight(Kg) | 18.5/20 | 21/22.5 | 22.5/24 | 23/24.5 | 25/26.5 | 26/27.5 | 26/27.5 | 26/29 | 32/35 | 33/36 |
Dimension(mm) | 482×453×88.8 | 482×453×132 | ||||||||
Power Range | (115V/230V)Can offer different voltage according client's requirement | |||||||||
