MAX-700 (Bass Amplifier)

Technical Specifications

Rated Power and Load:

Active Preamp Input (Input Pad switch “in”):

Crossover Low Output:

700W RMS into 2 ohms

      Load Impedance:

475W RMS into 4 ohms

Impedance:

      1k ohms or greater

275W RMS into 8 ohms

High Z, 68k ohms

      Nominal Output Level:

 

Nominal Input Level:

      0 dBV, 1V RMS

Power @ Clipping (Typically):

-17 dBV, 135 mV RMS

      Maximum Output Level:

(1 kHz, 120 VAC line)

Minimum Input Level:

      +20 dBV, 10V RMS

490W RMS into 4 ohms @

-38 dBV, 12 mV RMS

 

1% THD

Maximum Input Level:

Crossover High Output:

550W RMS into 4 ohms @

+20 dBV, 10V RMS

      Load Impedance:

5% THD

 

      1k ohms or greater

 

Preamp Output:

      Nominal Output Level:

Frequency Response:

Load Impedance:

      0 dBV, 1V RMS

-1 dB, 20 Hz to 30 kHz @ 400W

1k ohms or greater

      Maximum Output Level:

RMS into 4 ohms

Nominal Output Level:

      +20 dBV, 10V RMS

 

0 dBV, 1V RMS

 

Total Harmonic Distortion:

Maximum Output Level:

Effects Loop:

Less than 0.25%, 100 mW to

+20 dBV, 10V RMS

      Send Level:

450W RMS, 20 Hz to 10 kHz,

 

      -10 dBV, 315 mV RMS

4 ohms (typically below 0.1%)

Power Amp Input:

      Send Load Impedance:

 

Impedance:

      1k ohms or greater

DDT Dynamic Range:

High Z, 22k ohms

      Return Level:

Greater than 20 dB

 

      -10 dBV, 315 mV RMS

 

Designed Input Level:

      Return Input Impedance:

DDT Maximum THD:

 0 dBV, 1V RMS

      220k ohms

Below 0.5% THD for 3 dB

(Switching jack providing preamp output to power amp input connection when not used)

 

overload

Tuner Send:

Below 1% THD for 13 dB

 

     Level:

overload

System Hum and Noise @

      Buffered off the Input jack;

 

Nominal Input Level:

      Dependent on instrument level

Hum and Noise:

(20 Hz to 20 kHz unweighted)

      Load Impedance:

Greater than 90 dB below rated power

Greater than 75 dB below  rated power

      1k ohms or greater

 

 

      Low Z Balanced Line Out:

PREAMP SECTION:

Equalization:

   (600 ohm transformer balanced;

The following specs are measured @ 1 kHz with the Low, Mid & High EQ @ 0 dB; Contour @ 0; Mid Shift @ 1 kHz; Input Pad & Bright switch out (off); Post Gain @ 10; Nominal levels are with Pre Gain @ 5; Minimum levels are with Pre Gain @ 10.

      Low and High:

      Nominal levels with Pre Gain & Line

      +/-15 dB @ 40 Hz and 7 kHz, shelving

      Out Level @ 5; Maximum levels with

      Mid:

      Pre Gain & Line Out Level @ 10)

      +/-15 dB @ Mid Shift setting

      Nominal Pre-EQ Output Level:

      Mid Shift:

       -20 dBV, 100 mV RMS

 

      Variable from 200 Hz to 2 kHz

      Nominal Post-EQ Output Level:

Passive Preamp Input (Input Pad switch “out”):

     Contour:

      -26 dBV, 50 mV RMS

     Special EQ voicing

      Maximum Pre-EQ Output Level:

      Impedance:

     Push Bright:

      +20 dBV, 10V RMS

      High Z, 220k ohms

     +8 dB @ 8 kHz

      Maximum Post-EQ Output Level:

      Nominal Input Level:

 

      +10 dBV, 3V RMS

      -27 dBV, 45 mV RMS

Variable Crossover:

 

      Minimum Input Level:

     Frequency Range:

Net Weight/G Weight

      -48 dBV, 4 mV RMS

     100 Hz to 1 kHz

19.7kg/22.6kg

      Maximum Input Level:

 

 

      +10 dBV, 3V RMS

Slope:

Dimensions: (W x H x D)

 

12 dB per octave

23.375" W x 8.250" H x 12.875" D



Copyright © 2014 All Rights Reserved Enping Aoda Electronic Technology Co., Ltd

Add:Aoda Technology Zone, No.16, Feie East Road, Pingshi Industrial Area, Enping, Guangdong, China.

TEL:86-750-7122773    FAX:86-750-7122202    E-mail: aoda@aodapro.com

ICP15023790