Switching Power Supply power amplifier

FP-13000Q

FP-Q series Dedicated Installation Amplifier:
1、This FP-Q series amplifier uses the efficient switching power supply, the working mode of the amplifier is Class TD. This will increase the efficiency consumedly. Low weight and meet the energy requirts
2、Unprecedented power density: The TD-8800A delivers a total of 8800 W (4 ohms) in only 2U.
3、Four channels —— All channels bridgeable for 2- or 3-channel configurations.
4、Lo-Z or Hi-Z (70 V / 100 V) —— Selectable per channel, normal or bridged.
5、Voltage Peak Limiter (VPL) —— Configurable per channel to optimize each output forconnected loads.
6、Professional Class TD output stages for high efficiency and sonic transparency.
7、Comprehensive protection and warning —— Excessive output current, DC, high temperature, very high frequency (VHF), short circuit, open load, mains fuse protection, and soft start.
8、Efficient and uniform Intercooler cooling.

Technical Specifications

Characteristic	FP-13000Q	FP-12000Q	FP-10000Q	FP-8000Q
Number of channels	4	4	4	4
Peak total output all channels driven	8800W	6800W	4800W	2800W
Max Output Power
8 ohms per ch.(all ch.'s driven)	1250W	1200W	1000W	700W
4 ohms per ch.(all ch.'s driven)	2100W	1700W	1200W	700W
2 ohms per ch.(all ch.'s driven)	2200W	1200W	600W	300W

16 ohms Bridged per ch.¹)	2500W	2400W	2000W	1400W
8 ohms Bridged per ch.¹)	4200W	3400W	2400W	1200W
4 ohms Bridged per ch.¹)	4600W	2400W	1200W	600W
Output Circuit Type	Class TD
THD at 1 KHz and 1 dB below clipping	<0.05%
Signal To Noise Ratio	>112dBA
Channel separation (Crosstalk)at 1 KHz	＞70dB
Input Impedance	20kOhm
Input Common Mode Rejection,CMR	50dB
Dimension(W/H/D)	W:483mm(19"),H:88mm(2U),D:343mm(13.5")
weight	12kg(26.4Ibs.)